AEM’s Series 2 Programmable Engine Management System is more powerful than its predecessor. In addition to more robust hardware, there are several improvements over the original EMS, noted in the chart below. Like its predecessor, AEM's Series 2 Plug & Play EMS plugs directly into a vehicle's factory ECU harness and requires no additional wiring or hardware. Windows™ compatible software (XP, Vista, Windows7) makes the task of copying, viewing and manipulating data as simple as a click of the mouse. Our new AEMTUNER software is infinitely adjustable software and allows tuners to program virtually any combination of engine control, power adders and auxiliary devices, and accurately delivers proper amounts of fuel and correct ignition timing for any boost level or operating condition.

Legal in California only for racing vehicles which may never be used upon a highway.

SERIES 2 KEY FEATURES

• Plugs directly into the factory harness. No rewiring necessary.
• Uses all the factory sensors.
• Includes start up calibrations.
• System is fully enabled and unlocked - Never pay for upgrades!
• Context sensitive help eases tuning process.
• Maps can be password protected by the tuner to prevent unauthorized usage or sharing.
• Runs on Windows-compatible software.
• Up to 12 peak and hold injector drivers.
• Up to 8 direct-fire coil outputs.
• Up to 16 general-purpose outputs.
• Up to 8 definable switch inputs.
• Up to 4 EGT inputs with fuel trim.
• 1MB of internal data logging.
• Electronic boost control.
• Full idle control.
• Programmable traction control.
• Software definable knock control.
• Two step launch control.
• User configurable soft-cut rev limiters.
• Wet or dry nitrous control.
• Tune using new USB communication port or serial port.
• Works with all AEM gauges.

The Inline Wideband UEGO gives all the benefits of the AEM Wideband Air/Fuel Gauges to those who do not require or want an additional gauge in the car. Perfect for datalogging, engine management systems or racing applications where a gauge is not desired. Simple wiring and installation, the controller is weather proof and can be mounted anywhere in or outside the vehicle.

KEY FEATURES

• Ideal AFR monitoring tool for EFI and carbureted applications, and engine dynamometers
• Does not oscillate AFR reading like narrow band sensors
• No laptop required for monitoring!
• Bosch sensor included
• Accurate to 0.1 AFR
• 0-5v analog output included for use with data loggers and virtually any engine management system
• Detects AFR sensor problems and outputs error values which can be used to deactivate feedback
• Reads Gasoline AFR values from 8.5 to 18:1 AFR
• Reads E85 AFR from values 5.7 to 12:1 AFR
• Reads Ethanol AFR values from 5.2 to 11:1 AFR
• Reads Methanol AFR values from 3.7 to 7.8:1
• Reads Lambda values from 0.58 to 1.22 AFR

The AEM X-WiFi is the complete exhaust gas monitoring and tuning tool, combining the legendary AEM wideband UEGO and up to two EGT sensors in one compact, easy to install module. On top of that, the X-WiFi displays accurate, real-time, AFR and EGT data in a user-friendly layout via the standard web browser on virtually any WiFi enabled electronics device such as the iPhone™, Droid™* and Storm2™*. The AEM X-WiFi also offers a 0-5v analog output for use with data loggers and virtually any engine management system, such as the AEM EMS or FIC. Data stream output is included for PC viewing of AFR and EGTs via USB cable.

* Standard router required for Droid™ and Storm2™

Easy to conceal, yet simple to connect to wirelessly, the AEM X-WiFi system features a Bosch sensor with an accuracy of .1 AFR, making it among the fastest and most accurate widebands available. When used with the two K-Type EGT sensors, the X-WiFi gives fast and accurate reference to real-time exhaust gas conditions, for easy power tuning. With clean and easy installation and simple data viewing, the X-WiFi lets you monitor your Air/Fuel Ratio and EGT from a wide range of wireless devices and can be configured for either direct (adhoc) or network (infrastructure) WiFi communication. Bottom line, the X-WiFi is a must have for tuners and enthusiasts alike.

KEY FEATURES

• Ideal AFR monitoring tool for EFI and carbureted applications, and engine dynamometers
• No laptop or dedicated display required for monitoring
• Bosch sensor included
• Accurate to 0.1 AFR
• Optional EGT sensors sold separately (AEM Part# 30-2067)
• 0-5v analog outputs included (ARF, EGT1, EGT2) for use with data loggers and virtually any engine management system
• Serial data stream included for output of AFR and EGTs via USB cable
• Detects AFR sensor problems and outputs error values which can be used to deactivate feedback
• Reads EGTs from 0-1800F
• Reads Gasoline AFR values from 8.5 to 18:1 AFR
• Reads E85 AFR from values 5.7 to 12:1 AFR
• Reads Ethanol AFR values from 5.2 to 11:1 AFR
• Reads Methanol AFR values from 3.7 to 7.8:1
• Reads Lambda values from 0.58 to 1.22 AFR